2007 description the pg2150t5l is a gaas mmic sp3t switch which was developed for bluetooth and wireless lan. this device can operate frequency from 0.5 to 2.5 ghz, having the low insertion loss and high isolation. this device is housed in a 12-pin plastic tsqfn (t hin s mall q uad f lat n on-leaded) package. and this package is able to high-density surface mounting. features ? operation frequency : f opt = 0.5 to 2.5 ghz ? control voltage : v cont (h) = 2.3 to 3.6 v (2.85 v typ.) : v cont (l) = ? 0.2 to 0.2 v (0 v typ.) ? low insertion loss : l ins 3 = 0.50 db typ. @ f = 2.5 ghz, ant to rf1, 2, v cont (h) = 2.85 v, v cont (l) = 0 v : l ins 6 = 0.60 db typ. @ f = 2.5 ghz, ant to rf3, v cont (h) = 2.85 v, v cont (l) = 0 v ? high isolation : isl3 = 35 db typ. @ f = 2.5 ghz, ant to rf3, on port ant to rf1, 2, rf1 to rf3, on port ant to rf1, v cont (h) = 2.85 v, v cont (l) = 0 v : isl6 = 18 db typ. @ f = 2.5 ghz, ant to rf1, on port ant to rf2, 3, ant to rf2, on port ant to rf1, 3, v cont (h) = 2.85 v, v cont (l) = 0 v ? handling power : p in (1 db) = +31.0 dbm typ. @ f = 2.5 ghz, ant to rf1, 2, v cont (h) = 2.85 v, v cont (l) = 0 v : p in (1 db) = +25.0 dbm typ. @ f = 2.5 ghz, ant to rf3, v cont (h) = 2.85 v, v cont (l) = 0 v ? high-density surface mounting : 12- pin plastic tsqfn package (2.0 2.0 0.37 mm) applications ? antenna switch fo r bluetooth and 802.11b/g ordering information part number order number package marking supplying form pg2150t5l-e2 pg2150t5l-e2-a 12-pin plastic tsqfn (pb-free) 2150 ? embossed tape 8 mm wide ? pin 10, 11, 12 face the perforation side of the tape ? qty 3 kpcs/reel remark to order evaluation samples, contact your nearby sales office. part number for sample order: pg2150t5l the mark shows major revised points. the revised points can be easily s earched by copying an "" in the pdf file and specifying it in the "find what:" field. data sheet caution observe precautions when handling because these devices are sensitive to electrostatic discharge. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. sp3t switch for bluetooth tm and 802.11b/g gaas integrated circuit pg2150t5l document no. pg10653ej02v0ds (2nd edition) date published april 2007 ns cp(n) printed in japan
pin connections and internal block diagram pin no. pin name 1 ant 2 gnd 3 v cont 2 4 rf2 5 gnd 6 rf3 7 v cont 3 8 gnd 9 v cont 1 10 rf1 11 n.c. (bottom view) 1 2 3 9 8 7 4 5 6 12 11 10 (top view) 6 5 4 10 11 12 1 2 3 9 8 7 2150 (top view) 6 5 4 10 11 12 1 2 3 9 8 7 12 n.c. remark exposed pad : gnd truth table v cont 1 v cont 2 v cont 3 ant ? rf1 ant ? rf2 ant ? rf3 high low low on off off low high low off on off low low high off off on absolute maximum ratings (t a = +25 c, unless otherwise specified) parameter symbol ratings unit switch control voltage v cont ? 6.0 to +6.0 note v input power1 (ant ? rf1, ant ? rf2) p in 1 +31.5 dbm input power2 (ant ? rf3) p in 2 +25.5 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c note ? v cont (h) ? v cont (l) ? 6.0 v recommended operating range (t a = +25 c, unless otherwise specified) parameter symbol min. typ. max. unit operating frequency f opt 0.5 ? 2.5 ghz switch control voltage (h) v cont (h) 2.3 2.85 3.6 v switch control voltage (l) v cont (l) ? 0.2 0 0.2 v data sheet pg10653ej02v0ds 2 pg2150t5l
electrical characteristics (t a = +25 c, v cont (h) = 2.85 v, v cont (l) = 0 v, dc blocking capacito rs = 56 pf, unless otherwise specified) parameter symbol pass test conditions min. typ. max. unit insertion loss 1 l ins 1 ant to rf1, 2 f = 0.5 to 1.0 ghz ? 0.40 0.55 db insertion loss 2 l ins 2 f = 1.0 to 2.0 ghz ? 0.45 0.60 db insertion loss 3 l ins 3 f = 2.0 to 2.5 ghz ? 0.50 0.65 db insertion loss 4 l ins 4 ant to rf3 f = 0.5 to 1.0 ghz ? 0.45 0.60 db insertion loss 5 l ins 5 f = 1.0 to 2.0 ghz ? 0.55 0.70 db insertion loss 6 l ins 6 f = 2.0 to 2.5 ghz ? 0.60 0.75 db isolation 1 isl1 ant to rf3 f = 0.5 to 1.0 ghz 29 32 ? db on port ant to isolation 2 isl2 rf1, 2 f = 1.0 to 2.0 ghz 29 32 ? db rf1 to rf3 isolation 3 isl3 on port ant to f = 2.0 to 2.5 ghz 30 35 ? db rf1 isolation 4 isl4 ant to rf1 f = 0.5 to 1.0 ghz 23 26 ? db on port ant to isolation 5 isl5 rf2, 3 f = 1.0 to 2.0 ghz 17 20 ? db ant to rf2 isolation 6 isl6 on port ant to f = 2.0 to 2.5 ghz 15 18 ? db rf1, 3 input return loss rl in ant to rf1, 2, 3 f = 0.5 to 2.5 ghz 15 20 ? db output return loss rl out ant to rf1, 2, 3 f = 0.5 to 2.5 ghz 15 20 ? db 1 db loss compression p in (1 db) ant to rf1, 2 f = 1.0 ghz +28.0 +31.0 ? dbm input power note f = 2.0 ghz +28.0 +31.0 ? dbm f = 2.5 ghz +28.0 +31.0 ? dbm ant to rf3 f = 1.0 ghz +22.0 +25.0 ? dbm f = 2.0 ghz +22.0 +25.0 ? dbm f = 2.5 ghz +22.0 +25.0 ? dbm switch control current i cont ant to rf1, 2, 3 rf none ? 0.05 1.0 a switch control speed t sw ant to rf1, 2, 3 50% ctl to ? 50 ? ns 90/10% rf note p in (1 db) is measured the input power level when the insert ion loss increases more 1 db than that of linear range. data sheet pg10653ej02v0ds 3 pg2150t5l
evaluation circuit v cont 1 v cont 3 rf1 rf3 rf2 56 pf 56 pf 56 pf 1 000 pf 1 000 pf 1 000 pf ant 56 pf v cont 2 12 11 10 9 8 7 4 56 1 2 3 the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. data sheet pg10653ej02v0ds 4 pg2150t5l
mounting pad and solder pad layout dimensions 12-pin plastic tsqfn (unit: mm) mounting pad solder pad solder thickness : 0.08 mm 0.94 0.5 0.77 0.5 0.77 0.33 0.5 0.77 0.5 0.77 0.33 0.33 0.94 12?0.23 0.33 0.49 0.5 0.77 0.5 0.77 0.28 0.5 0.77 0.5 0.77 0.28 0.28 0.49 12?0.18 0.28 remark the mounting pad and solder pad layouts in this document are for reference only. data sheet pg10653ej02v0ds 5 pg2150t5l
package dimensions 12-pin plastic tsqfn (unit: mm) 2.00.1 2.00.1 (bottom view) 0.230.1 0.940.1 0.940.1 0.23 +0.07 ?0.05 (c 0.170.07) 0.500.06 0.37 +0.03 ?0.05 remark ( ) : reference value data sheet pg10653ej02v0ds 6 pg2150t5l
recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recomm ended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ir260 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of flow processes : 1 time maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperatur e (terminal temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering met hods together (except for partial heating). data sheet pg10653ej02v0ds 7 pg2150t5l
bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. the information in this document is current as of april, 2007. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific": data sheet pg10653ej02v0ds 8 pg2150t5l
caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. ? do not burn, destroy, cut, crush, or chemically di ssolve the product. ? do not lick the product or in any way allow it to enter the mouth. pg2150t5l
|
